The workbenches of hobbyists, hackers, and makers have become overrun with microcontrollers, computers-on-a-chip that power homebrewed video games, robots, toys, and more. In Making Things Talk, Tom Igoe, one of the creators of Arduino, shows how to make these gadgets talk.
Whether you need to connect some sensors to the Internet or create a device that can interact wirelessly with other creations, this book shows you what you need. Although they are powerful, the projects in this book are inexpensive to build: the Arduino microcontroller board itself ranges from around $25 to $40. The networking hardware covered here includes Ethernet, Wi-Fi, Bluetooth, and can be had for $25 to $50.
Fully updated for the latest Arduino hardware and software, this book lets you combine microcontrollers, sensors, and networking hardware to make things… and make them talk to each other!
It’s not enough to just build your Arduino projects; it’s time to actually learn how things work! This book will take you through not only how to use the Arduino software and hardware, but more importantly show you how it all works and how the software relates to the hardware. Arduino Software Internals takes a detailed dive into the Arduino enviro ...
Beginning Arduino Programming provides a clear introduction to writing Arduino code, building your skills with Arduino through a series of well-designed hardware and software building blocks. Once you have read this book, you'll be ready to program Arduino in exactly the ways you want for your future projects.
Make: Sensors is the definitive introduction and guide to the sometimes-tricky world of using sensors to monitor the physical world. With dozens of projects and experiments for you to build, this book shows you how to build sensor projects with both Arduino and Raspberry Pi.
Arduino's ubiquity and simplicity has led to a gigantic surge in the use of microcontrollers to build programmable electronics project. Despite the low cost of Arduino, you're still committing about $30 worth of hardware every time you build a project that has an Arduino inside. This is where Adafruit's Trinket comes in.
Atmel's AVR microcontrollers are the chips that power Arduino, and are the go-to chip for many hobbyist and hardware hacking projects. In this book you'll set aside the layers of abstraction provided by the Arduino environment and learn how to program AVR microcontrollers directly. In doing so, you'll get closer to the chip and you'll be able to sq ...
Данный материал НЕ НАРУШАЕТ авторские права никаких физических или юридических лиц. Если это не так - свяжитесь с администрацией сайта. Материал будет немедленно удален. Электронная версия этой публикации предоставляется только в ознакомительных целях. Для дальнейшего её использования Вам необходимо будет приобрести бумажный (электронный, аудио) вариант у правообладателей.
Название: 
Распечатать
